Jinwook's UAS Blog

 

the instruction for processing GCPS. 1. Obtain GCPs measurements in the field 2. On the menu bar, click View > Processing. The Processing bar appears at the bottom of the main Window. 3. Select 1. Initial Processing and deselect 2. Point Cloud and Mesh and 3. DSM, Orthomosaic and Index. 4. Click Start. 5. Add / import and mark ONLY 3 of the GCPs in the rayCloud 6. After having imported the 3 GCPs and having reoptimized the reconstruction, add / import the remaining GCPs with the GCP/MTP Manager WITHOUT marking them. 7. Mark the GCPs in the rayCloud 8. Click Process > Reoptimize. 9. (optional) Regenerate the quality report by clicking Process > Generate Quality Report. Initially Process the data first before setting GCPs. Figure 1,2: initial processing   I did initial processing with rapid in key points image scale. Figure 3: point...

Instructions: ·         Check out Skydio 2+ and safety vest from dispatch (Everyone must have a safety vest). ·         Drive to 2112 Beck Lane, Lafayette, IN, 47909. ·         Upon arrival, set up the Skydio 2+ and walk around the perimeter of the building and the inside of the building to get a better understanding of the environment that you will be flying. o    What potential hazards do you see? I could find the basketball nets. skydio 2 + ai obstacle avoidance can’t work on the nets. ·         Anyone who is not flying will be simulating either a hostage or a combatant and will be placed throughout the building. HOSTAGES will be wearing civilian clothes and COMBATANTS will be wearing safety vests. ·         When instructed, the pilot will takeoff from outside of the building and fly the Skydio 2+ thro...